User Manual

ATTACHING THE HANDLES
Loosen the grip's locking knob, slide the handle
onto the crossbar, and lock it in position.
You can pull the knob outward for ratchet
capability. (Fig. 1)
SECURING A GIMBAL
1. Loosen the clamp locks, alternating between
each one, until the clamp is fully open. (Fig. 2)
2. Insert your gimbal’s handle into the clamp. (Fig. 3)
If you are using a DJI or Moza gimbal, use the
included clamp insert. (Fig. 3a) Make sure the
insert's opening faces the clamp locks.
3. Tighten the locks, alternating between each
one, until the gimbal is secure in the clamp.
(Fig. 4) Do not overtighten.
Fig. 1
Fig. 2
Fig. 3a
Fig. 3
Fig. 4