Tus neeg siv phau ntawv

Installationsanleitung AXIbox 11K
EN221129 10
6.3 Electrical installation
The electrical supply to the wallbox is three-phase, a cable with 3 conductor phases, a neutral conductor
and a PE conductor is required.
Feed the cable through the left-hand opening at the bottom of the AXIbox housing. Clamp the wires of the
cable into the terminals provided. Use the wire end ferrules supplied and fix the cable inside the AXIbox
with the sleeve.
Schematic representation of the wiring
6.4 Final work
Put the housing cover back on the base and close the housing again with the two screws. The AXIbox is now
ready for use as soon as the power supply is switched on.
Before commissioning, check the following:
• The selected location ensures easy operation and repair
• The charging station has been properly installed
• The circuit breakers of the supply line are appropriate
• There are no devices and objects on the charging station