User`s guide

Page 12 AXIS T8412 User’s Guide
Configure Root Password
This setting allows you to specify a password for the
user "root", which will be used to access all new or
factory defaulted cameras. If an individual camera
uses a different password, this should be directly
entered when accessing that camera instead.
Use the keyboard to tap in the Username and
Password and tap Set Password.
AV In
Test analog video by connecting the BNC cable from the camera's video output to the AXIS T8412
video input port. Tap the AV In icon in the Main Menu, and the video signal will be displayed on the
LCD screen. Press the ESC key to return to the menu.
To adjust the contrast in the image, go to Setup > Setup AV.
Network cable test
Follow these steps to test a network cable for its
type; straight or cross, and for errors; open, short
or miswire.
1. Connect one end of the network cable to the
supplied CAT5 Network terminator and the
other end to the CAT5 port.
2. Tap the CAT5 icon in the Main menu
3. The cable's wire map will be displayed on the
screen.
Video in