User`s manual

AX2200/AX2300 Instruction Manual Chapter 3 Operation

CM2-AX2000-2001 (Rev. 4, 4/2014) 3-13

Fluid Menu

Use the Fluid Menu to configure the flow meter for use with common gases, liquids and steam. Your

flow meter is pre-programmed at the factory for your application’s process fluid.

Reference Richard W. Miller, Flow Measurement Engineering Handbook (Third Edition, 1996),

page 2-75 for definition and use of the Goyal-Doraiswamy equation and page 2-76 for the

definition and use of the API 2540 equation. Also, see Appendix C for Fluid Calculation

equations.

The units of measurement used in the Fluid Menu are preset and are as follows:

Mole Weight = lb

/(lb

·mol), CRIT PRESS = psia, CRIT TEMP = °R, Density = Kg/m

and

Viscosity = cP (centipoise).