User`s manual
AX2200/AX2300 Instruction Manual Chapter 3 Operation
CM2-AX2000-2001 (Rev. 4, 4/2014) 3-5
Programming the Flow Meter
1. Enter the Setup Menu by pressing the ENTER key until prompted for a password. (All
outputs are disabled while using the Setup Menus.)
2. Use the keys to select the password characters (1234 is the factory-set
password). When the password is correctly displayed, press ENTER to continue.
3. Use the Setup Menus described on the following pages to customize the multi-
parameter features of your AX2000Series Flow Meter. (The entire lower display line is
available for entering parameters.) Some items depicted in the graphic on the
preceding page may not be displayed based on flow meter configuration settings
4. To activate a parameter, press ENTER. Use the keys to make selections. Press
ENTER to continue. Press EXIT to save or discard changes and return to Run Mode.
5. Program the UNITS menu first because later menus will be based on the units
selected.