User`s manual

AX2200/AX2300 Instruction Manual Chapter 2 Installation
CM2-AX2000-2001 (Rev. 4, 4/2014) 2-27
Figure 2-26. AC Power Connections
Figure 2-27. DC Wiring Terminals
DC Power Wiring
The DC power wire size must be 20 to 10 AWG with the wire stripped
1/4 inch (7 mm). Connect 18 to 36 VDC (300 mA, 9 W maximum) to the
+DC Pwr and –DC Pwr terminals on the terminal block.
Torque all connections to 4.43 to 5.31 in-lbs (0.5 to 0.6 Nm).
Figure 2-28. DC Power Connections
Caution!
The DC wire insulation temperature rating
must meet or exceed 85°C (185°F).