User`s manual
Series AX2200/AX2300 Instruction Manual Appendix A Specifications
CM2-AX2000-2001 (Rev. 4, 4/2014) A-3
Nominal Pipe Size (in)
Pressure0.50.7511.523468
6.5 12 20 49 82 183 318 722 1264
52 122 265 650 1087 2431 4231 9594 16806
15 27 46 112 187 419 728 1652 2893
271 639 1386 3405 5690 12729 22156 50233 87998
20 37 62 151 253 565 983 2229 3905
493 1163 2525 6203 10365 23184 40354 91494 160279
24 45 74 182 304 680 1184 2685 4704
716 1688 3664 9000 15040 33642 58556 132763 232575
28 51 85 209 349 780 1358 3079 5393
941 2220 4816 11831 19770 44222 76971 174516 305717
31 57 95 233 389 870 1514 3433 6014
1170 2760 5988 14711 24582 54987 95710 217001 380148
300 psig
400 psig
500 psig
Typical Saturated Steam Minimum and Maximum Flow Rates (lb/hr)
5 psig
100 psig
200 psig
Nominal Pipe Size (mm)
Pressure 15 20 25 40 50 80 100 150 200
3 5 8 19 32 72 126 286 500
18 42 91 224 375 838 1459 3309 5797
6 11 18 45 75 167 290 658 1153
95 224 485 1192 1992 4455 7754 17581 30799
8 15 24 59 99 222 387 877 1537
168 397 862 2118 3539 7915 13777 31237 54720
9 17 29 71 119 266 463 1050 1840
241 569 1236 3036 5073 11347 19750 44779 78444
11 20 33 81 136 304 529 1199 2100
314 742 1610 3956 6611 14787 25738 58355 102226
13 24 40 99 165 369 642 1455 2548
463 1092 2370 5822 9729 21763 37880 85884 150451
15 barg
20 barg
30 barg
Typical Saturated Steam Minimum and Maximum Flow Rates (kg/hr)
0 barg
5 barg
10 barg
Linear Range Smart electronics corrects for lower flow down to a Reynolds number of 5,000. The Reynolds
number is calculated using the fluid’s actual temperature and pres-
sure monitored by the meter. Rangeability depends on the fluid, pro-
cess connections and pipe size. Consult factory for your application.
Typical velocity range ability in standard applications is as follows:
Liquids 30:1 1 foot per second velocity minimum
30 feet per second velocity maximum
Gases 30:1 10 feet per second velocity minimum
300 feet per second velocity maximum
Process Fluid Pressure
AX2200 Pressure Ratings
Process
Connection
Material Rating
Flanged 316L SS, A105 Carbon Steel, C276 Hastelloy
150, 300, 600 lb, PN16,
PN40, PN64
Wafer 316L SS, A105 Carbon Steel, C276 Hastelloy 600 lb, PN64