User`s manual

Chapter 4 Serial Communications AX2200/AX2300 Instruction Manual
4-34 CM2-AX2000-2001 (Rev. 4, 4/2014)
PropertiesofAnalogInput/ValueObjectsType
ID Name
Present
Value
Status
Flags
Event
State
Outof
Service
out-of-service
BV1 Reset ?
F,F,F,F Normal False
False
Data Link Layer Options:
BACnet IP, (Annex J)
BACnet IP, (Annex J), Foreign Device
ISO 8802-3, Ethernet (Clause 7)
ANSI/ATA 878.1, 2.5 Mb. ARCNET (Clause 8)
ANSI/ATA 878.1, EIA-485 ARCNET (Clause 8), baud rate(s)
MS/TP master (Clause 9), baud rate(s): 9600, 19200, 38400
MS/TP slave (Clause 9), baud rate(s):
Point-To-Point, EIA 232 (Clause 10), baud rate(s):
Point-To-Point, modem, (Clause 10), baud rate(s):
LonTalk, (Clause 11), medium:
Other:
Device Address Binding:
Is static device binding supported? (This is currently necessary for two-
way communication with MS/TP slaves and certain other devices.) :
Yes No
Networking Options:
Router,Clause6‐Listallroutingconfigurations,e.g.,ARCNET‐
Ethernet,Ethernet‐MS/TP,etc.
AnnexH,BACnetTunnelingRouteroverIP
BACnet/IPBroadcastManagementDevice (BBMD)
DoestheBBMDsupportregistrationsbyForeignDevices?
 Yes No
 DoestheBBMDsupportnetworkaddresstranslation?
 Yes No

NetworkSecurityOptions:
Non‐secureDevice‐iscapableofoperatingwithoutBACnetNetwork
Security
SecureDevice‐iscapableofusingBACnetNetworkSecurity(NS‐SD
BVBB)