User`s manual

AX2200/AX2300 Instruction Manual Chapter 4 Serial Communications
CM2-AX2000-2001 (Rev.4, 4/2014) 4-29
3.3. BinaryInputObject:
Vortex Mass Flow Meters Binary Input type objects are described
in the below Table.
Object
Instance
Object
Name
Description
1 Alarm1 Thestatus ofthethreealarmsmaybe monitored
via the Modbus command. The value returned
indicatesthestateofthealarm,andwillbe1only
ifthealarm isenabledand active.Azero value is
transmittedforalarms that areeitherdisabledor
inactive
2 Alarm2
3 Alarm3
4 External TBD

Note‐BinaryInput4,Presentvaluealwaysreadzero,becauseno
informationavailablefromclient,sothepolaritypropertydoesn’t
impactonPresentvaluepropertywhentheOutofservice
propertyisfalse.

3.4. BinaryValueObject:
Vortex Mass Flow Meters Binary Value type objects are described
in the below Table.
ObjectInstance ObjectName Description
1 Reset Reset’sTotalizer