User manual

AXIS Q7424–R

Recordings

TheAxisproductcanbeconﬁgured to record video continuously or according to an action rule:

• To start a continuous recording, see

page 35

• To set up ac tion rules, see

page 32

• To access recordings, see

Recording List, on page 35

•Toconﬁgure camera controlled s torage, see

Storage, on page 43

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recor ding’s start date and tim e, duration and the

event that triggered the recordi ng.

To play or download a recording, follow these steps:

1. Go to Recordings > List.

2. Use the ﬁlter to narrow the lis t of recordings. Enter the desired ﬁlter criteria and click Filter. Some ﬁlters may take

a long time to complete.

3. Select the recording.

4. Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded ﬁle is a zip ﬁle

containing a minimum of three ﬁles, of which the Matroska (mkv) ﬁlesaretheactualrecordings.The recordings are time-stamped

with the date and time they w ere dow nloaded (tha t is, not the date the

recordings were made).

Note

To play record ings in W indow s Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter

can be downloaded f rom www.axis.com/techsup/software

For detailed r ecor ding and video information, select a recording and click Properties.

To remove a recording, select the r ecord ing and click Remove.

Continuous recording

The Axis product can be conﬁgured to continuo usly save video to a storage device. See

Storage, on page 43

for more information

about storage devices. To prevent the disk from becoming full, it is recommended to conﬁgure the disk to automatically remove

old recordings.

To start a continuous recording, follow these steps:

1. Go to Recordings > Continuous.

2. Select Enabled.

3. Select type of storage device from the Disk list.

4. Select a Stream proﬁle to use for continuous recordings.

5. Click Save to save and start the recording.