User manual

AXIS Q7424–R
Accessing the Product
Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the
mouse pointer.
Click the Center mode button and click in the image to center the camera view on that positio n. The cente r mode
button could also be used to zoom in on a specific are a. Click in the i m age a n d drag to draw a rectangle surroundi n g
theareatobemagnified. To zoom out, rotate the mouse wheel.
Click the Ctrl panel button to open the PTZ control panel w hich pro vides additional PTZ controls.
User-defined buttons can also appear in the Control panel. See
Controls, on page 27 .
Select the video channel or a PTZ preset position to steer the camera view to the saved position. See
Preset Positions, on pag e 25 .
Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the
camera view to that position.
Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.
Focus bar – Use the arro ws to focus the camera, or click on a position on the bar to set the focus position. Using the
focus bar will disable the product’s autofocus. To re-enable, use the PTZ control panel which is opened by clicking
the Ctrl panel button (see above).
Iris ba r – Click on a position on the iris bar to change the degree to which the iris is opened . This will disable the
product’s auto iris. To re-enable, use the PTZ control panel wh ich is opened by clicking the Ctrl panel button (see above).
The PTZ controls can be disabled under PTZ > Advanced > Controls,see Controls, on page 27 .
11