User`s manual

34
AXIS Q7404 - System Options
Alternatively, it may be possible to upload the certificate and key in one combined file, (e.g. a PFX file or PEM file). Provide the
path to the file, or use the Browse button to locate it. Click Upload to load the file. To remove a certificate and key, click the
Remove button.
Settings
EAPOL version - Select the EAPOL version (1 or 2) as used in your network switch.
EAP identity - Enter the user identity associated with your certificate. A maximum of 16 characters can be used.
Private key password - Enter the password (maximum 16 characters) for your user identity.
Enable 802.1X - Check the provided box to enable the IEEE 802.1X protocol.
Audio Support (Channel 1)
Enable audio support - Allow clients to retrieve audio streams from the AXIS Q7404, and is used to totally enable or disable
the sound source. See also Audio Settings (Channel 1), on page 15 for information on how to configure the audio settings.
Note:
This parameter will enable/disable all audio functionality in the video encoder, even in configured events and stream
profiles with audio.
Date & Time
Current Server Time - Displays the current date and time (24h clock). The time can be displayed in 12h clock format in the
overlay (see below).
New Server Time - Select your time zone from the drop-down list. If you want the server clock to automatically adjust for
daylight savings time, select the Automatically adjust for daylight saving time changes.
From the Time Mode section, select the preferred method to use for setting the time:
• Synchronize with computer time – Sets the time from the clock on your computer.
• Synchronize with NTP Server – The video encoder will obtain the time from an NTP server every 60 minutes.
• Set manually – This option allows you to manually set the time and date.
Note:
If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings.
See Basic TCP/IP Settings, below.
Date & Time Format Used in Images - Specify the formats for the date and time (12h or 24h) displayed in the video streams.
In addition the predefined formats, customized date and time formats can be used. See File Naming & Date/Time Formats in
the online help for information on how to create your own date and time formats.
Network
Basic TCP/IP Settings
AXIS Q7404 support both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version
must always be enabled. When using IPv4, the IP address for the video encoder can be set automatically via DHCP, or a static
IP address can be set manually. If IPv6 is enabled, the video encoder receives an IP address according to the configuration in
the network router. There is also the option of using the AXIS Internet Dynamic DNS Service. For more information on setting
the IP address, please see the Installation Guide supplied with the product.
Network Settings
Click the View button for an overview of the IP configuration of the video encoder.