User`s manual

28
AXIS Q7404 - Pan Tilt Zoom
Guard tour
A guard tour moves between chosen Preset Positions, one-by-one, in a pre-determined order or at random, and for
configurable time periods. The guard tour sequence will keep running after the user has logged off or closed the browser.
Advanced
Device Settings
The device settings window is for driver specific settings, so the appearance of this window can vary depending on the driver
installed. Options that can be configured include: Driver Specific Settings for Video Source 1, Mechanical Limits for Moving
Video Source 1, Light Control for Video Source 1, and Extended Driver Specific Settings for Video Source 1.
Note:
For download and installation information about PTZ drivers for your Axis product please visit www.axis.com
Controls
Driver-specific Panel Shortcut Command Buttons can be created to provide direct access to auxiliary commands provided by
the PTZ driver. The buttons will be displayed in the PTZ control panel which is opened by clicking Ctrl Panel on the Live View
page.
The pan, tilt, focus and iris controls can be disabled by unchecking the boxes under Enable/Disable controls.
See also PTZ controls, on page 30, and Control panel, on page 31.
Limits
Define the pan, tilt, zoom and focus limits. Movements to the left and right, up and down can be restricted to narrow the area
under surveillance. The near focus limit can be set to avoid focusing on objects too close to the camera.
Note:
To be able to set limits, the driver needs to be an “absolute” driver.’