User manual

36
AXIS Q7404 - System Options
IPv6 Address Configuration
Check the box to enable IPv6. Other settings for IPv6 are configured in the network router.
Services
Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method (for instructions, see the
Installation Guide supplied with the product), which associates the unit's MAC address with an IP address. Check this box to
enable the service. Leave disabled to prevent unintentional resetting of the IP address.
Notes:
• The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is
set.
• Pinging the unit is still possible when this service is disabled.
Enable AVHS - AXIS Video Hosting System (AVHS) in conjunction with an AVHS service provides easy and secure Internet
access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service
Provider please go to www.axis.com If AVHS is not to be used this option can be disabled.
• One-Click enabled - Press the camera’s control button (see Hardware overview, on page 6) to connect to an AVHS
service over the Internet. Once registered the camera stays connected to the AVHS service. If the camera is not
registered within 24 hours after the button is pressed, the camera will disconnect from the AVHS service.
• Always - The camera will constantly attempt to connect to the AVHS service over the Internet. Once registered the
camera will stay connected to the service. This option can be used when the camera is already installed and it is not
convenient to use the one-click installation.
AXIS Internet Dynamic DNS Service - Use the AXIS Internet Dynamic DNS service to assign a host name for easy access to
your video encoder. Click Settings to register the video encoder with the Axis Internet Dynamic DNS service, or to modify the
existing settings (requires access to the Internet). The domain name currently registered at the Axis Internet Dynamic DNS
Service for your product can at any time be removed. For more information, please refer to the online help and
www.axiscam.net
Advanced TCP/IP Settings
DNS Configuration
DNS (Domain Name Service) provides the translation of host names to IP addresses on your network.
Obtain DNS server address via DHCP - Automatically use the DNS server settings provided by the DHCP server. Click the
View button to see the current settings.
Use the following DNS server address - Enter the desired DNS server by specifying the following:
• Domain name – Enter the domain(s) to search for the host name used by the video encoder. Multiple domains can be
separated by semicolons (;). The host name is always the first part of a Fully Qualified Domain Name, for example,
myserver is the host name in the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is
the Domain name.
• DNS servers – Enter the IP addresses of the primary, and secondary DNS servers. (This is not mandatory with regard
to secondary DNS servers.)
NTP Configuration
Obtain NTP server address via DHCP - Check this radio button to automatically look up and use the NTP server settings as
provided by DHCP. Click the View button to see the current settings.
Use the following NTP server address - To use manual settings, check this radio button and enter the host name or IP
address of the NTP server.