User manual

21
AXIS Q7404 - PTZ (Pan Tilt Zoom)
PTZ configuration
Once PTZ has been installed for the AXIS Q7404, the following sub menus appear under PTZ.
Preset positions
A preset position is a pre-defined camera view than can be used to quickly move the camera to a specific location.
From Preset Position Setup, use the PTZ controls to steer the camera to the required position. When satisfied with the
camera's position, enter a descriptive name. Click Add to save the camera position, iris and focus settings as a preset position.
The position can be assumed at any time, by selecting the preset's name from the Preset positions drop-down list. Preset
positions can be selected in the Live View page; they can be selected as an action when an event is triggered or as a part of a
Guard Tour.
One position can be set as the Home position, which is readily accessible by clicking the box beside Use current position as
Home. The position's name will then have (H) added to the end, for example, Office Entrance (H).
Guard tour
A guard tour moves between chosen Preset Positions, one-by-one, in a pre-determined order or at random, and for
configurable time periods. The guard tour sequence will keep running after the user has logged off or closed the browser.
Note:
It is not recommended to run two or more guard tours at the same time.