Installation guide

Page 18 AXIS Q6032-C/Q6034-C/Q6035-C Installation Guide
7. Make sure the clamp is in place and tighten the screws.
• The shield and the clamp surface shall be in full contact with each other so that the multi-
connector cable is grounded.
• Make sure all surfaces and contacts are clean and free from scrap shield material.
1
7
6
5
3
4
2
8
9
I/O connector
Ethernet connector
Ethernet connector
Power connector
Shield
Clamp
(DC output)
(internal)
(internal)
(internal)
Shield (2x)