Installation guide

AXIS Q6032-C/Q6034-C/Q6035-C Installation Guide Page 17
ENGLISH
4. Strip the multi-connector cable. Make sure all three shields are intact.
5. Connect the network and I/O wires to the internal network and I/O connectors; open the lid,
insert the wires and close, see the illustration and table above for proper wiring.
6. Connect the ground and power wires to the power connector (DC output), see the illustration
and table above for proper wiring.
40 mm (1.57”)
7–8 mm (0.28”–0.32”)
30 mm (1.18”)
1
2
3
4
5
6
7
8
9
1 Red Power
2 Blue Digital I/O
3 Green/white Ethernet
4 Green Ethernet
5 Orange/white Ethernet
6 Orange Ethernet
7 Yellow Digital I/O
8Black Ground
9 Red Power
Shield
Shield (2x)