Installation guide

AXIS Q6034 Installation Guide Page 11
ENGLISH
8. Secure the camera using the supplied safety wire.
9. Slide the unit holders on the network camera into the slots on the mounting plate and rotate
the camera unit.
10. Install the High PoE Midspan 1-Port, see
Install the AXIS T8123 High PoE Midspan 1-port, on
page 13.
11. Check that the indicator LEDs on the midspan indicate the correct conditions. See the table on
page 23 for further details.
12. Install the ceiling tile, with the camera mounted, into the ceiling.
13. Place the drop ceiling cover over the ceiling bracket and tighten the screws.
Safety wire
Ceiling tile
Ceiling bracket
Hook for
safety wire
Drop ceiling cover
Drop ceiling cover screws