Installation guide

PRODUCT REVIEW GUIDE  AXIS Q6032-E Network Camera
Axis Communications Last updated: September, 2009
7
2. Navigate to the Bonjour bookmark in your browser (e.g. Safari) and click on the camera’s
link to access the Web pages.
3. See below for instructions on how to set the password.
6 Getting started
The following section will provide a “guided tour” through the camera and some of its features,
with short instructions on how to configure the camera.
6.1 Administrator Password
The first time you connect to the camera, you must set the root password:
Once the root (administrator) password has been set, you will be able to log into the camera.
The default log in is:
User name: root
Password: [your password]
If this is the first time you connect to an Axis network camera, you may be prompted to install
the Active X component, which allows viewing of the video stream in Internet Explorer.