User manual

AXIS Q6032-E PTZ Dome Network Camera

Events

- Recurrence — trigger the rule periodically, see

Recurrences, on page 34

. This can for example be used to

upload an image every 5 minutes.

- Use Schedule — trigger the rule according to t he selected schedule , see

Schedules, on page 33

Available actions incl ude:

• PTZ Control

- Autotracking — start autotracking, see

Autotracking, on page 23

- Preset Position — go to a preset position.

- Guard Tour — start a guard tour, se e

Guard Tour, on page 25

• Record Video — record video to a selected storage.

• Send Images —sendimagestoarecipient.

• Send Notiﬁcations —sendanotiﬁcation message to a recipient.

Convert Event Types to Action R ules

If the Axis product is upgraded to ﬁrmware version

5.40

or later, it is recommended to convert Event Types to Action Rules .The

legacy user Event Types in the camera will continue to work but will not be visible in the user interface of the camera. The Event

Types need to be converted to Action rules to become visible in the user interface.

To convert Event Types to Action Rules go to Events > Action Rules and click Convert.

NOTICE

This is not recommende d when using a VMS based on the old Event Mana g e m ent System.

Setting Up an Action Rule

An action rule deﬁnes the conditions that must be met for the p roduct to perform an action, f or example record video or send email

notiﬁcations. If multiple conditions are deﬁned, all must be met to trigger the action.

The following example describes how to set up an action rule to record video to a netwo rk share if there is movement in the

camera’s ﬁeld of view.

Set up motion detection and add a network share:

1. Go to Detectors > Motion Detection and conﬁgure a motion detection window, see

page 28

2. Go to System Options > Storage and set up the network share, see

page 44

Set up the action rule:

1. Go to Events > Action Rules and click Add.

2. Select Enable rule and enter a d escriptive name for the rule.

3. Select Detectors from the Trigger drop-down list.

4. Select Motion Detection from the drop-down list. Select the motion detection window to use.

5. Optionally, select a Schedule and Additional conditions,seebelow.

6. Under Actions, select Record Video from the Type drop-down list.

7. Select a Stream proﬁle and conﬁgure the Duration settings as described below.

8. Select Network Share from the Storage drop-down list.