User manual

About this Document
This manual is intended for administrators and users of AXIS Q6032-E
PTZ Dome Network Camera , and is applicable to firmware 5.41 and
later. It includes instructions for using and m anaging the product on
your network. P revious experience o f networking will be of use when
using this product. Some knowledge of UNIX or Linux-based systems
may also be beneficial, for developing shell scripts and applications.
Laterversionsofthisdocumentwill be posted to t he Axis website,
as required. See also the product’ s online h e lp, availa ble via the
web-based interface.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Axis Communica tions AB
makes no warranty of any kind with regard to the material c ontained
within this document, includin g , bu t not limited to, the implied
warranties of merchantability and fitn ess for a particular purpose. Axis
Communications AB shall not be liable nor responsible for incidental or
consequential damages in connection with the furnishing, performance
or use of this m aterial. This product is only to be used for its intended
purpose.
Intellectual Property Rights
Axis AB has int ellectual pro perty rights relating to technology embodied
in the product described i n this document. In particular, and without
limitation, these intellectual property rights may include one or more
of the p atents listed at http://www .axis.com/patent.htm and one or
more additional patents or pending patent applications in the U S and
other countries.
This product c o ntains licensed third-party software. See the menu item
“About” in the product’s user in terface for more information.
This product contains source code copyright Apple Computer,
Inc.,underthetermsofApplePublicSourceLicense2.0(see
http://www.opensource.ap ple.com/apsl). The source code is available
from http ://developer.apple.com/darwin/projects/bonjour/
Equipment Modifications
This equipment must be insta lled and used in strict accordance with th e
instructions given in the user documentation. This equipment contains
no user-serviceable components. Unauthorized equipment changes or
modifications will invalidate all applicable regu la tory certifications
and approvals.
Trademark A cknowledgments
Apple, Boa, Bo njour, Ethernet, Internet E xplorer, Linux, Microso
ft,
Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, Windows Vista and
WWW are registere d trademarks of the respective holde rs. Java and
all Java-based trademarks and logos are trademarks or registe
red
trademarks of Oracle and/or its affiliates. UPnP
TM
is a certification
mark of the UPnP
TM
Implementers Corporation.
Electromagnetic C ompatibility (EMC)
This equipment has been designed and tested to fulfill applicable
standards for:
• Radio frequency emission whe n installed according to the
instructions and used in it s intended environment.
• Immunity to elect rica l and electromagnetic phenomena when
installed according to the instructions and used in its intend ed
environment.
USA
This equipm ent has been tested using a shielded network cable (STP)
and found to com ply with th e limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and , if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular ins tallation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experie nced radio/TV technician for help.
Canada
This Class B digital apparatus comp lies with Canad ia n ICES-003.
Europe
This digital equipment fulfills the requirements for RF emis sion
according to the Class B limit of EN 55022.
This product fulfills the requirements for immunity according
to EN 61000-6-1 residential, commercial and light-industrial
environments.
This product fulfills the requirements for immunity according to
EN 61000-6-2 industrial environments.
This product fulfills the requirements for immunity according to
EN 55024 office and commercial environme n ts.
Australia/New Zealand
This digital equipment fulfills the r equ irements f or RF emission
according to the Class B limit of AS/NZS CISPR 22.
Korea
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사
용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다.
Japan
この装置は、クラスB 情報技術装置です。この装置は、家庭
環境で使用することを目 的としていますが、この装置がラジ
オやテレビジョン受信機に近接して使用されると、 受信障
害を引き起こすことがあります。 取扱説明書に従って正し
い取り扱いをして下さい。
Safety
This product complies with EN/IEC 60950-1 and EN/IEC 60950-22,
Safety of Information Techno
logy Equipment.
The powe r supply used with this product shall fulfill the requirements
for Safety Extra Low Voltage (SELV) and Limited Power Source (LPS)
according to EN/IEC/UL 60950-1.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your
reseller will forward your queries through the appropriate channels to
ensure a rapid response. If you are connected to the Internet, you can:
• download use
r documentation and software updates
• find answers to resolved problems in the FAQ database. Search
by product, category, or phrase
• report pr
oblems to Axis support staff by logging in to your private
support area
• chat with Axis support staff (selected c ountries only)
• visi
t Axis Support at www.axis.com/techsup/
Le
arn More!
Visit Axis learning center www.axis.com/academy for useful trainings,
webinars, tutorials and guides.