Installation guide

AXIS Q6032-E/Q6034-E/Q6035-E Installation Guide Page 15
ENGLISH
4. To log in, enter the user name “root” in the dialog as requested
Note: The default administrator user name root cannot be deleted.
5. Enter the password as set above, and click OK.
Note: If the password is lost, the camera must be reset to the factory default settings. See page 20.
6. AXIS Q6035-E: The capture mode must be
set the first time the camera is accessed.
Select the desired Capture Mode from the
drop-down list and click OK.
Note: The capture mode can be changed later
from the product’s web pages, but this
will reset most other settings. For more
information, see the online help or the
User Manual.