User`s manual

23
AXIS Q1910/-E/AXIS Q1921/-E - Live View Config
Viewer Settings
Check Show
viewer toolbar to display the AXIS Media Control (AMC) or the QuickTime viewer toolbar under the video image
in your browser.
The administrator can disable the installation of the H.264 decoder included
with AMC. This is used to prevent the
installation of unlicensed copies. Further decoder licenses can be purchased from your Axis reseller.
Enable Show
crosshair in PTZ joystick mode and a crosshair will indicate the center of the image in PTZ joystick mode.
Check Use PTZ joystick mode as default to use joystick mode. The mode can be changed temporarily from the PTZ control
panel.
Check the Enable rec
ording button to enable recording from the Live View page. The recordings are saved to the location
specified in the AMC Control Panel, see
AXIS Media Control (AMC), on page 15.
Action Buttons
Check the boxes to display action buttons on th
e Live View page.
The m
anual trigger button can be used to manually trigger and stop an event. See Applications, on page 26.
The snapsh
ot button can be used to save a snapshot from the video stream. This button is mainly intended for use with
browsers other than Internet Explorer, or when not using AXIS Media Control (AMC) to view the video stream.
AXIS Media Control for Internet Explorer has its own snapshot button.
Check Play au
dio clip enabled to display the Audio clip drop-down list, allowing users to manually play audio clips from the
Live View page.
User Defined Links
User-defined links can link to web pages or can be
used to
run scripts or activate and control external
devices connected to the network camera. Once
configured, the links appear on the Live View page.
To set up a link, check the Show
custom link box,
select the cgi or web link radio button, enter the
URL and a descriptive name in the provided fields.
A link defined as a web link will open in a new
window, while a cgi link
will run for example a
script in the background.
User-defined cgi links can be used to issu
e API
requests. For information on the VAPIX®
Application Programming Interface (API), see the
Developer pages at Axis web site www.axis.com/developer.
Output Buttons
The output buttons are used to manually activate and inactivate devices connected to the output ports, for example to switch
a light on and off. To display output buttons on the Live View page, select the type of control to use for the port from the
drop-down list:
• Pulse -
Activates the output for a defined period of time
• Acti
ve/Inactive - Displays two buttons, on for each action (on/off)
The camera’s I/O ports can be configured as input or output under System Opt
ions > Ports & Devices > I/O Ports. See I/O
Ports,
on page 40.
User-defined link