Installation guide

AXIS Q1910/Q1910-E Installation Guide Page 5
ENGLISH
AXIS Q1910/Q1910-E Installation Guide
This installation guide provides instructions for installing an AXIS Q1910/Q1910-E Thermal
Network Camera on your network. For all other aspects of using the product, please see the User’s
Manual, available from www.axis.com
Installation steps
1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the hardware.
• Install AXIS Q1910. See page 8.
• Install AXIS Q1910-E. See page 8.
• Connect the cables. See page 9.
4. Assign an IP address. See page 10.
5. Set the password. See page 13.
Package contents
Item Models/variants/notes
Network camera AXIS Q1910/Q1910-E
Terminal block connector 4-pin connector for connecting external devices to the I/O terminal
connector
3-pin connector for power connection
2-pin connector for RS-485/422 connection
Camera stand (AXIS Q1910) Metal stand supplied with mounting screws
Wall bracket (AXIS Q1910-E) Wall bracket with internal cable channel
Tools (AXIS Q1910-E) Torx T20 Screwdriver
Allen key
Network cable (AXIS Q1910-E) Outdoor network cable 5 m (16 ft.) with gasket
Printed materials AXIS Q1910/Q1910-E Installation Guide (this document)
Axis Warranty Document
Extra serial number labels (2x)
Optional accessories See www.axis.com for information on power accessories and outdoor
housings, product documentation, installation tools and other software.