User Manual

AXIS M5525-E PTZ Network Camera

Speciﬁcations

To nd the latest version of the product’s datasheet, go to the product page on axis.com and locate Support & Documentation.

LED indicators

Status LED

Indication

Unlit

Connection and normal operation.

Green Shows steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during rmware upgrade or reset to factory default.

Amber/Red Flashes amber/red if network connection is unavailable or lost.

SD card slot

NONO

TICETICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your ngers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports microSD/microSDHC/microSDXC cards.

For SD card recommendations, see axis.com

Buttons

Control button

The control button is used for:

• Resetting the product to factory default settings. See How to reset to factory default settings on page 16.

• Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the

status LED ashes green.

Connectors

Network connector

RJ45 Ethernet connector with Power over Ethernet (PoE).

Audio connector

4-pin terminal block for audio input and output. See Product overview on page 3 .

For audio in, the left channel is used from a stereo signal.

Pin Notes

AUDIO IN

Microphone or line in (mono)