User`s guide

Appendix C -Modem Installation AXIS 200+ and 240 User’s Guide
34
6. Go to the Server Types tab and disable
the NetBEUI and IPX/SPX
Compatible checkbox.
Click TCP/IP Settings...
7. Select Specify an IP address, and enter
the IP address of your adapter.
Notes:
The IP address selected must be on
the same Network segment as the IP
address of the Axis Camera Server
that you intend to connect to.
If you have a network card installed
on your PC, the IP address of your
camera server and your dial-up
adapter can not be on the same net-
work segment as the network
adapter.
8. Uncheck Use default gateway on
remote network and click OK.