User`s guide

Appendix A - Hardware Inventory AXIS 200+ and 240 User’s Guide
26
Connectors and Indicators
This information provides a useful reference when performing the remaining stages of the
installation.
The AXIS 200+ Camera Server
Auxiliary I/O Connector -
A Mini-DIN 8-pole external connector with two alarm inputs,
one relay output and an Auto-Iris connector for the AXIS 200+.
RS-232 Serial Connector -
A 9 pin D-sub connector provides the physical RS-232 serial
interface to a modem server within the AXIS 200+.
Ethernet 10BaseT Connector -
10BaseT (RJ-45) twisted pair Ethernet connector for
connection to the network.
Power Supply Connector -
Jack socket for connection of the AXIS 200+ power supply.
Note:
The power supply supplied with your AXIS 200+ is country specific. Please check that the type
of power supply you are using is correct. See page 25.
Snapshot Indicator -
The Snapshot indicator will flash on every occasion the AXIS 200+
takes a snapshot.
Power Indicator -
The Power indicator is normally lit while power is applied. If it is not lit, or
it flashes, there is problem with the AXIS 200+ power supply.
Net Indicator -
The Net indicator flashes to indicate network activity.
Camera Lens -
Wide angle lens with rotational-focus control. Possible to mount standard C/CS
lenses.
Serial Number -
The serial number is located on the underside label of the AXIS 200+. Please
note that the serial number of your AXIS 200+ is identical to the Ethernet address of the unit.
Control Button -
The Control button is used for multiple purposes, e.g. restoring the factory
default settings, triggering CRON scripts.
Net
Power
Control Ethernet RS-232 serialPower supplySnapshot Auxiliary I/O
Camera lens
Serial number
connector
10baseTindicator
button
indicatorLock ring CS ring
indicator