User`s guide

AXIS 200+ and 240 User’s Guide Verifying the Installation

Important!

Note:

When you execute the ping command for the first time, you will experience a significantly longer

response time than usual.

Using ARP in UNIX and OS/2

To download the IP address and verify the communication, type the following commands:

Example:

The host will return ‘

192.16.253.80 is alive

’

or some similar message to indicate that the

address has been set and the communication is established.

Note:

When you execute the ping command for the first time, you may experience a significantly longer

response time than usual.

Verifying the Installation

After assigning an IP address, verify the connection between your camera server and the network.

1. Start your Web browser and enter the name or IP address in the location/address field:

Example

or:

Windows 95 only: When using the Windows 95 implementation of ARP, change the first line to:

arp -s <camera IP address> <Ethernet address> <w95host IP address>

, where

is the IP

address of your Windows 95 host.

Example:

Example:Example:

Example:

arp -s 192.16.253.80 00-40-8c-10-00-86 192.16.253.81

ping 192.16.253.80

arp -s <camera IP address> <Ethernet address> temp

ping <camera IP address>

arp -s 192.16.253.80 00:40:8c:10:00:86 temp

ping 192.16.253.80

http://cameraserv/

http://192.16.253.80/