User`s manual

AXIS 5470e User’s Manual Section 6: Setting Up - NetWare

Controlled Access 1. Make sure that the HP NDPS Gateway is not configured to

automatically create a public access printer, before you connect

the AXIS 5470e to the network.

2. Connect the AXIS 5470e to the NetWare network.

3. Use the NetWare Administrator to create an NDPS printer as an

object in the NDS Tree.

4. Create a new Printer Agent (PA) or convert a Public Access Printer

to a Controlled one.

5. Choose the Axis Gateway configuration. Select TCP/IP or IPX as

transport protocol and complete required tasks.

6. You are now ready to print in your NDPS environment. Your

printer will appear as an NDS object in the Directory Tree and will

offer a full range of network security options.

Use the Novell Print Manager to install the controlled access printer

on a client workstation.

Setup using Queue-based printing over IP/IPX in PSERVER Mode

All previous firmware versions of Axis print servers allow users to

print in an IPX environment using traditional queue-based printing in

PSERVER mode. This method is supported in both Bindery and NDS

mode.

Axis Communications is one of the few companies in the world that

offers the possibility of printing in a Pure IP environment, using

queue-based printing in PSERVER mode. This method is only

supported by Axis print servers with firmware version 6.0 and later

and only in NDS environments. Pure IP is only supported by NetWare

5 or higher.

In a Pure IP NetWare environment, the NetWare Administrator should

be used to create the printer, print server and queue objects.