User`s manual

Section 6: Setting Up - NetWare AXIS 5470e User’s Manual
96
Section 6 Setting Up - NetWare
This section describes how to continue the installation of the AXIS
5470e in the NetWare environment. Identify which transport
protocol you are running on your network and which installation
method you should use. Continue the installation by selecting the
appropriate installing instructions from the table below:
If you intend to operate your AXIS 5470e in a multi-protocol, mixed
environment, you should also proceed to the other relevant sections
in this manual, namely:
Section 7 Setting Up - Windows, on page 104
Section 9 Setting Up - Macintosh, on page 122
Section 10 Setting Up - UNIX, on page 128
Section 12 IPP (Internet Printing Protocol), on page 158
Installation
method
Transport
protocol
Action
NDPS TCP/IP
IPX/SPX
See Setup using NDPS, on page 97
Proceed with Installing the AXIS 5470e in an NDPS environments,
on page 97.
Printer
Configuratio
n method
Transport
protocol
Action
PSERVER
mode
IP/IPX See Setup using Queue-based printing over IP/IPX in PSERVER
Mode, on page 99 and then
Queue-based Printing Methods, on page 102
Remote
Printer mode
IPX/SPX See Setup for Queue-based printing over IPX/SPX (Remote Printer
Mode), on page 101 and then
Queue-based Printing Methods, on page 102