User`s manual

Section 5: Setting Up - IBM Mainframe AXIS 5470e User’s Manual

CHARS Specifies a default JES3 font.

CKPNTPG

Specifies the number of pages between data-set checkpoints. If checkpoint intervals are too frequent, printer

performance is significantly reduced. If intervals are too infrequent, and a PSF error occurs, the job has to be

reprocessed from the last checkpoint. In this case, printer performance is significantly reduced if PSF errors

continue to occur. The recommended starting value is 100.

DTYPE

Identifies the printer device type. For the AXIS 5470e you should specify the parameter value PRTAFP1. This

parameter is required.

FSSNAME

Specifies a unique FSS for this printer DEVICE statement. The value must match the value coded for the

FSSNAME parameter in the corresponding FSSDEF statement.

HEADER

Specifies if job and data set header pages are printed. If DPF is installed, you may need to specify HEADER=YES.

JNAME

Specifies the name of the printer FSA. Each printer FSA should have a unique JNAME. This unique JNAME is 8

characters or fewer and must correspond to its label on the

CNTL, ENDCNTL, and PRINTDEV

statements for the PSF startup procedure specified in the

PNAME parameter. This parameter is required.