User`s manual

AXIS 5470e User’s Manual Section 5: Setting Up - IBM Mainframe

Modifying the

TCP/IP profile

The TCP/IP profile contains system configuration statements used to

initialize the TCP/IP address space. Among those statements, the

following are subject to special considerations when you are printing

from PSF on TCP/IP-attached printers:

•DATABUFFERPOOLSIZE

• SMALLDATABUFFERPOOLSIZE

• TINYDATABUFFERPOOLSIZE

• KEEPALIVEOPTIONS

• GATEWAY

Below is an excerpt from an example TCP/IP Profile (not a complete

profile) . Examples of the statements above are printed in bold:

Note:

ACBPOOLSIZE 1000

ADDRESSTRANSLATIONPOOLSIZE 1500

CCBPOOLSIZE 150

DATABUFFERPOOLSIZE 160 32768

ENVELOPEPOOLSIZE 750

IPROUTEPOOLSIZE 300

LARGEENVELOPEPOOLSIZE 50

RCBPOOLSIZE 50

SCBPOOLSIZE 256

SKCBPOOLSIZE 256

SMALLDATABUFFERPOOLSIZE 256

TCBPOOLSIZE 512

TINYDATABUFFERPOOLSIZE 256

UCBPOOLSIZE 100

KEEPALIVEOPTIONS INTERVAL 10 SENDGARBAGE FALSE ENDKEEPALIVEOPTIONS

GATEWAY

; * Network First Hop Linkname Packet Size Subnet mask Subnet value

10 = BCPLAN 2000 255.255.255.0 10.10.12.0

DEFAULTNET 10.10.12.1 BPCLAN 2000 255.255.255.0 0

If you change any of the values in the TCP/IP profile, you must restart TCP/IP to

activate the new settings.