User`s manual

AXIS 5470e User’s Manual Section 5: Setting Up - IBM Mainframe

PPR/PPD Printing - IPDS data streams

Note:

Before you begin In order to use the AXIS 5470e to print IPDS data using TCP/IP as the

transport protocol, the following software must be installed and

configured on your MVS:

• PSF/MVS Version 2 release 2.0 with APAR OW15599.

• MVS Scheduler APAR OW12236 to support the two new

PRINT-

DEV

keywords: IPADDR and PORTNO.

• TCP/IP version 3 release 1, or higher

Configuration

Procedures

The configuration procedures presented in this section are divided

into seven separate steps:

1. Specifying the TCP/IP address space name

2. Defining the MVS control unit

3. Modifying the TCP/IP profile on your MVS system, if necessary

4. Configuring the AXIS 5470e

5. Verifying the communication between the AXIS 5470e and the

IBM Mainframe

6. Defining the AXIS 5470e as a writer-controlled printer to JES

7. Defining the printer to PSF with a

PRINTDEV statement,

including the IP address and port number.

IPDS is only available for AXIS 5470e models with the IPDS option installed.

Please refer to Product Model Summary, on page 7.