User`s manual

AXIS 5470e User’s Manual Section 5: Setting Up - IBM Mainframe

Notes:

You can now generate a configuration report from NW for SAA. To do

this, simply mark the server icon in the left window and select

Generate Server Configuration Report from the

function menu.

The following table is a summary of a report generated by this

command for the example above.

• When the LUs are created the default names for the Printer Devices will be

<name prefix> followed by a two digit number starting at the number you

entered in the starting dependent LU number field.

• In the example below, eight LUs are created automatically. The LU names

created will be BRLTST04 through to BRLTST0B. These names must

correspond to the Printer Names you specify for the TN3270E sessions in

the Print Server.

Profile Name NWSAA

SNA Network ID: SEEDB

Peripheral node control point name: CPNAME

Block ID/PU ID: 05D 66204

Local/Partner SAP for ILUs: 04

Logical Adapter: E100B_1

PU Profile: NWSAAPU

Adapter Name E100B_1

Adapter Type: LLC 802.2

Terminate peer link if no active APPC sessions: No

Logical adapter number: 0

Number of local service access points: 2

Enable adapter at startup: Yes