User`s manual

Section 5: Setting Up - IBM Mainframe AXIS 5470e User’s Manual
70
Notes:
NetWare for
SAA Server
To set-up a TN3270E connection to the AXIS 5470e you have to set
up PU and LU definitions. This is done by following the steps below:
1. Start the NWSAA Administrator.
2. Double-click the NWSAA Node. The panel below will appear.
3. Enter the Node ID for the host.
4. Leave the rest at their default settings.
Peer PU profile
5. Click the TN3270 icon. The panel below will appear.
6. Select All Available Host PU profiles.
• You can check the status of the TN3270E connection by printing a test page
from the Print Server. This is done by pressing the test button once. Make
sure the TN3270E status (St:) line for your server connection is defined as
either:
•SSCP
•LU-1
•LU-3
• For additional information about configuring other TN3270E servers, refer
to the Technical Notes via the AXIS Web pages.