User`s manual

AXIS 5470e User’s Manual Section 5: Setting Up - IBM Mainframe
69
SNA Server - AXIS 5470e connection
1. Select the new LUA and drag it to the TN3270 connection
definition (highlighted in the SNA Server Manager Window
above).
2. Select the properties of the LUA.
3. Click the TN3270 tab in the properties popup window.
4. Select Generic Printer Type.
5. Click the IP Address List tab.
6. Specify the IP Address of the client(s) that you want to assign to
this LU. This is the IP address of the AXIS 5470e, i.e. the same as
the INT_ADDR parameter in the Print Server.
7. Click OK.
Verifying the
Communication:
1. Activate the connection you created in step 2 of the above SNA
Server - AXIS 5470e connection procedures. The status of the
connection should be “active”.
2. Make sure the corresponding LU in the host is activated.
3. Activate the TN3270 connection to the AXIS 5470e. The LUA
should change status to SSCP.
4. Check that the printer is connected to the AXIS 5470e.
5. Send a print job from the host.
The AXIS 5470e is now ready for use.