User`s manual

AXIS 5470e User’s Manual Section 5: Setting Up - IBM Mainframe

Verifying the

Communication Link

The easiest way to test the communication is by sending a print job

to the AXIS 5470e. If there are problems, press the test button once

to print the test page where you can find the present SNA link status.

Procedures 1. Power on the Print Server and wait for 2 minutes.

2. Press the test button once to print a test page and make sure

that the SNA status line is defined as either:

•Idle

•Actv

•LU-1

•LU-3

Note:

The AXIS 5470e is now ready for use in the SNA environment.

Please refer to Axis’ Technical Notes and FAQ on the Axis Web site, if the status

line indicates that the SNA link is not active.