User`s manual

Section 5: Setting Up - IBM Mainframe AXIS 5470e User’s Manual

Note:

Node Definitions The example below shows how the print server PU and LU definitions

may be coded in a local major node definition:

In the PU definition, IDNUM should be set to the five last digits of the AXIS

5470e node address, NODE_ADDR. By default NODE_ADDR stands for the five

last digits of the AXIS 5470e serial number.

In the path definition, PATH DIALNO should be comprised with its first two

digits equal to the place holder, the next two set to the SAP and the remaining

twelve digits set to the AXIS 5470e Ethernet or Node address. By default the

Ethernet/Node address is identical to the AXIS 5470e serial number. A valid

GRPNM must also be supplied.

In the LU definition, the LOCADDR number maps to the Logical Printer number

of the AXIS 5470e. The first eight Local Addresses pass the printout through

Logical Printer 1-8. However, some IBM systems do not allow Local Address 1 to

be used for printing. Refer to Section 13 Using Logical Printers, on page 170

for more information about logical printers.

* 5470e DSPU DEFINITION

DSPU5470e PU CUADDR=E31, X

MODETAB=MODE3290, X

PUTYPE=2,ISTATUS=ACTIVE,MAXBFRU=1

DSPULU02 LU LOCADDR=2 X

SSCPFM=USSSCS, X

USSTAB=USSTAB, X

PACING=1, X

VPACING=2, X

ISTATUS=ACTIVE, X

LOGAPPL=MWTC, X

DLOGMOD=SCS5470e