User`s manual

Section 4: Setting Up - AS/400 AXIS 5470e User’s Manual
48
Creating a Printer
Device Description
Create a printer device description by following the instructions
below:
1. Issue the command CRTDEVPRT and press Enter.
2. Press F11 to display keywords.
3. Select a name for the printer device and enter it at the
Device
Description (DEVD)
line. The name may comprise the letters
A-Z and the numerals 0-9, but must begin with a letter. A
maximum of 10 characters are allowed. In the following
instructions the printer device name will be referred to as
AXISPR1.
4. Enter
*LAN at the Device class (DEVCLS) line.
5. Enter
*IPDS at the Device type (TYPE) line.
6. Enter
0 at the Device model (MODEL) line.
7. Enter
*IP at the LAN attachment (LANATTACH) line.
8. Enter a port number at the
Port number (PORT) line. The Axis
print server is pre-configured with the port numbers 5001, 5002
and 5003 for IPDS printing.
9. Enter a FGID number at the
Font Identifier (FONT) line, e.g.
11 (Courier).
10. Define the
Remote location (RMTLOCNAME). Use the IP address
of the AXIS 5470e.
11. (Optional) Enter the name of the previously created PSF
configuration at the
User-defined object (USRDFNOBJ):
Object
line.
12. (Optional) Enter the library of the previously created PSF
configuration at the
User-defined object (USRDFNOBJ):
Library line.
13. (Optional) Enter
*PSFCFG at the User-defined object
(USRDFNOBJ): Object type line.
14. Press the Enter key on your keyboard to create the printer device
description.