User`s manual

Section 4: Setting Up - AS/400 AXIS 5470e User’s Manual

PPR/PPD Printing - IPDS data streams

Note:

The configuration procedures presented in this section are divided

into three separate steps:

• Configuring the AS/400 host

• Configuring the AXIS 5470e

• Verifying the communication between the AXIS 5470e and the

AS/400

Before you begin Make sure that the AS/400 host is running OS/400 V3R6 or higher

with TCP/IP support installed and configured.

Make sure that the latest PTFs are installed. Information about which

PTFs to use can be obtained from:

Configuring the

AS/400 Host System

When configuring the AS/400 host system you can:

• create a PSF configuration

• create a printer device description

Creating a PSF

Configuration

The system uses default values but you can optionally create a PSF

configuration by following the instructions below:

1. Issue the command CRTPSFCFG.

2. Press F11 to display keywords.

IPDS is only available for AXIS 5470e models with the IPDS option installed. For

more information, refer to Product Model Summary, on page 7.

http://as400service.rochester.ibm.com/