User`s manual

Section 4: Setting Up - AS/400 AXIS 5470e User’s Manual

Verifying the

Communication Link

1. Type WRKCFGSTS *CTL xxxx* on the AS/400 command line

(xxxx is the first four characters of the AXIS 5470e 5494 LU

Name)and press Enter. After a couple of minutes, ensure that

the following items are displayed:

• One APPC controller with the same name as the AXIS

5470e 5494 LU Name.

• One APPC device with the same name as the AXIS 5470e

5494 LU Name, one controller session (QRMTWSC) and

the currently active printer sessions (QRMTWSC).

• One twinax controller named xxxxxRMT, where xxxxx

are the first five characters of the AXIS 5470e 5494 LU

Name.

• One, two or three twinax printer device named

xxxxPRT0z (xxxx are the first four characters of the

AXIS 5470e 5494 LU Name and z is the printer device

number).

The status of all items should now be ACTIVE or VARIED

ON.

2. Type STRPRTWTR xxxxPRT0z on the AS/400 command line

(xxxxPRT0z is the printer device name) and press Enter. This

command starts the writer for this printer device.

3. Press the AXIS 5470e test button once to print a test page.

Ensure that the SNA status is defined on the test page as Idle,

Actv or LU-4.