User`s manual

Section 23: The Parameter List AXIS 5470e User’s Manual
234
--- TCP/IP MENU
TCP_ENB. : YES
TCP/IP Enabled
INT_ADDR. : 0 0 0 0
Internet Address
DEF_ROUT. : 0 0 0 0
Default Router Address
(0.0.0.0 for no router)
NET_MASK. : 0 0 0 0
Net Mask
(e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)
PROS_PWD. : netprinter
PROS Password
PROS_PRT. : 35
PROS TCP Port Number
LPD_BANN. : OFF (OFF, AUTO, LAST)
LPD Banner Page Mode
DHCP_ENB. : YES
DHCP Enabled
BOOTP_ENB. : YES
BOOTP Enabled
RARP_ENB. : YES
RARP Enabled
WINS_ENB. : YES
WINS Enabled
WINS_ADDR1. : 0 0 0 0
Primary WINS server Address
WINS_ADDR2. : 0 0 0 0
Secondary WINS server Address
NBT_SCOPE ID. :
NBT Scope ID
(Defines the NetBIOS scope to be used with WINS name registration)
DNS_ENB.: YES
Domain Name Server enabled
DNS_ADDR1. :0 0 0 0
The IP address of the primary DNS server. Used e.g. for setting up
destinations with names instead of IP addresses.
DNS_ADDR1. : 0 0 0 0
The IP address of the secondary DNS server, if the primary is
unavailable or disconnected.
DOMAIN_NAME
Specifies the name of the domain to which the print server belongs
SLP_SCOPE_LIST.: Default
Defines the SLP scope to which the AXIS 5470e belongs.
SMTP_SERVER :
Mail Server that uses Simple Mail Transfer Protocol.
RTN_OPT. : NO
Reverse Telnet Options Enabled
PPR_PRSTAT. : NO
Generates printer status report if enabled
RTN_PR1. : 5001, IPDS, 1 (IPDS option only)
PR1 Reverse Telnet Port Number, data stream and emulator
RTN_PR2. : 0, ASCII, 2(Non-IPDS option only)
PR2 Reverse Telnet Port Number, data stream and emulator
RTN_PR3. : 0, ASCII, 3(Non-IPDS option only)
PR3 Reverse Telnet Port Number, data stream and emulator
RTN_PR4. : 5011, SCS, 4
PR4 Reverse Telnet Port Number, data stream and emulator
RTN_PR5. : 5012, SCS, 5
PR5 Reverse Telnet Port Number, data stream and emulator
RTN_PR6. : 5013, SCS, 6
PR6 Reverse Telnet Port Number, data stream and emulator
RTN_PR7. : 0, ASCII, 7
PR7 Reverse Telnet Port Number, data stream and emulator
RTN_PR8. : 0, ASCII, 8
PR8 Reverse Telnet Port Number, data stream and emulator
--- SNMP MENU
READ_COM. : public
Read Community
WRT_COM. : pass
Read/Write Community
TRAPADDR. : 0 0 0 0
Trap Address
TRAP_COM. : public
Trap Community
SYS_NAME. :
System Name
SNMP_AUT. : DISABLE (DISABLE, ENABLE)
Authentication Failure Trap
TRAP_PRT. : DISABLE (DISABLE, ENABLE)
Printer Failure Trap