User`s manual

Section 3: Basic Installation AXIS 5470e User’s Manual
22
Setting the IP address
To establish communication with the TCP/IP network, an IP
Address must be assigned to your AXIS 5470e. Choose an
appropriate method from the table below:
All methods are enabled by default
If you are working in a Windows network with automatic IP
address assignment, your print server will obtain an IP address
automatically when you connect it to the network. Follow the
instructions on this page to verify the IP address:
1. Open a web browser (e.g. Internet Explorer or Netscape
Communicator).
2. In the Web browser’s Location/Address field, enter the print
server’s IP address, found on the test page (see Connecting a
printer to the Ethernet Network, on page 16) and press
Enter.
3. If the Network Print Server web page appears in your Web
browser, the IP address was set automatically when you
connected the AXIS 5470e to your network.
4. If the Network Print Server web page does not appear, you
need to set the print server’s IP address manually using one of
the methods described in Manual IP address assignment, on
page 24.
Method: Server Required: Comment:
DHCP DHCP server Dynamic assignment of IP addresses
RARP RARP server Static assignment of IP addresses
BOOTP BOOTP server Static assignment of IP addresses
Auto-IP Windows environments Automatic assignment of IP addresses