User`s manual

Section 16: SNA Gateways AXIS 5470e User’s Manual
192
5. Configure PU and LUs. On the Configure PU Profile screen you
can set default LU attributes, starting dependent LU address,
number of dependent LUs, give CP a name, enable off-line test
mode, status assignment of LUs activated by host, status call
host at workstation attach, status PU profile start-up and logical
adapter name. On the Configure Dependent LUs screen you can
set VTAM LU name, lock for a session, LU type and model and
preserve host session.
6. Assign LU Resources and Access Control Lists (ACLs). On the
Configure Dedicated LUs you can dedicate a LU to a person or
device or group of persons. This person(s) is described in the
access control lists.
7. Configure Downstream PU. Choose Configure Downstream PUs
and press insert. Give it a name and fill in starting LU address or
leave at default, type in number of DownStream LUs and logical
adapter name:
The CSCON adds new parameters according to the adapter type you
have set. The resulting screen can look like this:
Concentrator gateway,
Microsoft
This is an outline of the procedure for configuring to a Microsoft SNA
Server. More information is provided in the Support section of the
Axis web site at http://www.axis.com
1. Configure host connection.
2. Configure downstream connection.
Configure Downstream PU Connection
Downstream PU name (CP name): _____________________________DPUname
Starting downstream LU address: ___________________________2
Number of downstream LUs: _________________________________1
Logical adapter name: _____________________________________
Netware Comm Services Config V2.0 Wednesday 1999 September 4 16.27
Configure LUs for Downstream PUs _______________Downstream PU: AXIS5470e
DLU __Address __PU Profile __LU Address __LU Type __Model __VTAM LU Name
002 __(0x02) ____SAA_MAIN ____15 (0x0F) __Printer __________________ACP4