User`s manual

Section 15: SNA Parameter Overview AXIS 5470e User’s Manual
188
Auto-configuration and Mapping
The configuration created in the AS/400 and the mapping to the AXIS
5470e as a result of the auto-configuration process is illustrated by
the figure below.
Illustration of the configuration created in the AS/400 and the mapping to the AXIS
5470e as a result of the auto-configuration
Printer Device
Descriptions
Through auto-configuration, the APPC controller, APPC device, RWS
controller as well as printer device descriptions for the logical
printers, will be created automatically.
Controller and Device
Names
The names of the controllers and devices created in the AS/400
during auto-configuration are by default the last 7 characters from
the AXIS 5470e serial number in reverse order, preceded by the letter
"A".
For example, serial number "00408C180102" will result in APPC-
controller "A201081C", APPC-device "A201081C" and RWS-
controller "A2010RMT".
APPC-controller
APPC-device
RWS-controller
Printer device #1
Printer device #2
Printer device #3
Logical Printer #1
Logical Printer #2
Logical Printer #3
Configuration in the
AXIS 5470e
Configuration in the
AS/400
Logical mappings
LU 6.2 conversation