User`s manual

Section 15: SNA Parameter Overview AXIS 5470e User’s Manual
186
Updating parameters
This is most easily done from the internal web pages of your AXIS
5470e. To set the parameters using a Web browser, you first need to
assign an IP address to the AXIS 5470e. For instructions on how to do
this, refer to Assigning an IP address, on page 20.
Alternatively, you can update the parameters via FTP, TFTP or by using
extended IBM printer emulation.
Using extended IBM printer emulation means setting up the AXIS
5470e by printing a file containing extended IBM emulation
commands to it after you have established communication with your
IBM host. The configuration is started by inserting the sequence
%CONFIG+ in your text. To protect your settings, a password must be
provided. By default, the password is
pass. You may then set the
parameter values directly using the syntax shown below:
Syntax:
When all parameters have been set the
SAVE command saves the
settings permanently. The
%CONFIG- command resumes normal
printing. In order to maintain backward compatibility, some
parameters must be preceded by a
%CONFIG++ command. See also
The Parameter List, on page 231.
<Parameter name> = <value> [, <value>];