User`s manual

AXIS 5470e User’s Manual Section 15: SNA Parameter Overview
185
Mainframe Specific
Parameters
AS/400 Specific
Parameters
Parameter Name Default
NODE_ID Node ID
E07xxxxx, where "xxxxx" are the last five digits of the
Print Server’s MAC address.
This is the SNA PU identification.
The first 3 digits is the IDBLK and the last five is the IDNUM.
When defining a VTAM Switched Major Node, this parameter should match the IDBLK and IDNUM values
specified in the PU definition.
Only Hexadecimal characters (0-9 and A-F) allowed.
Parameter Name Default Emulation
NWORK_NAME Network Name APPN 5494 only
Description - This is the Print Server Network Name.
The value of this parameter is normally the same as the "Host Network Name", indicating that both the
Print Server and the AS/400 system are located on the same APPN network.
The Network Name may comprise the letters A-Z and/or numerals 0-9, but must begin with a letter.
The letters used should all be in UPPERCASE and a maximum of 8 characters are allowed.
LU_NAME LU Name Axxxxxxx 5494 only
Description - Axxxxxxx, where "xxxxxxx" is the last 7 characters of the AXIS 5470e serial number, in
reverse order, e.g.
if s.no. =
00 40 8C 1B 06 D4 the default LU Name =
A4D60B1C.
This will be the name of the APPC device and controller
created during auto-configuration
Description - Axxxxxxx, where "xxxxxxx" is the last seven characters of the Print Server serial number, in
reverse order, i.e. a print server with serial number 00 40 8C 1B 06 D4 will have the default CP Name
A4D60B1C. This will be the name of the APPC controller created during auto-configuration.
H1_NW_NAME Host Network Name APPN 5494 only.
H1_LU_NAME Host LU Name
DEFAULT
5494 only