User`s manual

AXIS 5470e User’s Manual Section 3: Basic Installation
17
Notes:
Installation Guide
After connecting the AXIS 5470e to your network, you are now ready
to perform the basic setup procedures. The method of installation
that you choose should be dictated by your printing requirements and
the type of network into which you are integrating.
The test page includes a list of the most important parameters, including
the network speed and the firmware version number.
Each print server is pre-configured with a unique node address that is
identical to the serial number. The node address can be changed using any
standard Web browser. Please refer to Management and Configuration,
on page 134, for more information.
The AXIS 5470e
uses high speed Centronics communication. For use with
older printers not supporting high speed, this function can be disabled by
using any standard Web browser. Please refer to Section 11 Management
and Configuration, on page 134, for more information.