User`s manual

Section 11: Management and Configuration AXIS 5470e User’s Manual
156
Configuring the Print Server from an IBM host
Once communication with an IBM host has been established, all the
AXIS 5470e parameters can be edited by printing a file containing
special configuration commands. To start the configuration, the
command
%CONFIG+ is entered in the file. To protect your settings, a
password must be provided. By default, the password is
pass. When
all parameters are set, the command
SAVE is used to store the
parameters permanently. The command
%CONFIG- leaves the
configuration mode and resumes normal printing. The syntax for the
file to print is:
In order to maintain backward compatibility and increase security,
many parameters that are not related to the IBM printing operation
have to be preceded by the
%CONFIG++ command. When all
parameters are set, enter
%CONFIG--. The parameters requiring
%CONFIG++ are clearly marked in the parameter listing on the
following pages.
%CONFIG+ <password;>
IBM_PRINTING_PARAMETER_NAME = VALUE;
SAVE;
%CONFIG-
%CONFIG+ <password;>
IBM_PRINTING_PARAMETER_NAME = VALUE;
%CONFIG++
PARAMETER_NAME = VALUE;
%CONFIG--
SAVE;
%CONFIG-