User`s manual

Section 11: Management and Configuration AXIS 5470e User’s Manual
142
Installing AXIS
ThinWizard
You should only install AXIS ThinWizard on a designated server
on your network. When you want to use AXIS ThinWizard for
management purposes, you just access the server via any
standard web browser.
The AXIS ThinWizard software is available on the AXIS
Network Product CD and can also be downloaded from the Axis
web site at www.axis.com
Note:
Starting AXIS
ThinWizard
Follow the instructions below to start the AXIS ThinWizard:
1. Make sure that the computer where you installed the AXIS
ThinWizard is up and running on your network.
2. Start a web browser from a client in your network.
3. Enter the IP address or the host name of the server where you
installed AXIS ThinWizard. If the server is installed on another
port than 80, you must enter the port name after the host name
or the IP address.
4. The AXIS ThinWizard start page appears in the web browser.
Enter your user name and the password and click the Log in
button.
5. The AXIS ThinWizard interface appears. Select a network group
from the list. If the list is empty, you must first create a group.
You cannot install the AXIS ThinWizard server software on a Windows 3.1 or a
Windows for Workgroups server. However, you can access AXIS ThinWizard’s web
interface from any TCP/IP client in your network